General Engineering - Publications

---

General Engineering RDF, 4.3mb <RDF Zip, 324kb>
People, 440kb	Publications, 2.0mb	Groups, 39kb	Institutions, 28kb

BOTTOM

• 4248 Publication References

Author	Title	Date	Place of Publication	Research Group	Co-Authors
Yousef S Y S	Performance, InterArrival and Correlation Analysis of four-phase MMPP Model in ATM-based B-ISDN	1996	Anglia Polytechnic University	Engineering Analysis Group	Schormans, J.A.
Yousef S Y S	Experimental Investigation of Performance of TCP/IP over ATM Networks Using NetPIPE	2000	Anglia Polytechnic University	Engineering Analysis Group	Strange, C.
Yousef S Y S	Experimental Investigation of the Effects of Delay and Error Rate on Throughput and Performance of 3G ATM Satellite Links Serving LAN Islands	2000	Anglia Polytechnic University	Engineering Analysis Group	Strange, C.
Yousef S Y S	TCP/IP over ATM Challenges in Enterprise Network Integration	1998	Anglia Polytechnic University	Engineering Analysis Group	Strange, C
Strange C M	The Development of a Multi-State MMPP Queuing Model for High-Speed ATM Networks	1998	Anglia Polytechnic University	Engineering Analysis Group	Yousef, S.Y.
Strange C M	ATM Modelling: Parameterisation of 4-phase MMPP Model for Admission Control of Superposed Traffic Sources	1997	Anglia Polytechnic University	Engineering Analysis Group	Yousef, S.Y. Schormans, J.A.
Strange C M	ATM Modelling: Parameterisation of the 4-phase MMPP Model for the Superposed Traffic Sources	1997	Anglia Polytechnic University	Engineering Analysis Group	Yousef, S.Y. Schormans, J.A.
Strange C M	ATM Modelling: Capturing the Serial Correlations in a Superposition Characterisation Algorithm	1998	Anglia Polytechnic University	Engineering Analysis Group	Yousef, S.Y.
Shirvani H	Analysis and Computer Simulation of the Electrochemical Machining Process: a Stepped Moving Tool Eroding a Plane Surface	1996	Anglia Polytechnic University	Engineering Analysis Group	Mileham, A.R. Hardisty, H.
Shirvani H	Theoretical and Computational Investigation of the Electrochemical Machining Process for Characteristic Cases of a Stepped Moving Tool Eroding a Plane Surface	1997	Anglia Polytechnic University	Engineering Analysis Group	Mileham, A.R. Hardisty, H
Shirvani H	ECMSIMNG: Simulation of Electrochemical Machining Process - Analysis in Motion (using Moving Boundary Finite Element Methods)	1997	Anglia Polytechnic University	Engineering Analysis Group
Shirvani H	Junction Temperature Measurement in Electronic Devices A Closed Loop System	2000	Anglia Polytechnic University	Engineering Analysis Group	Mirzaee, I Shirvani A
Zhang L	Fabrication of high-rejection/low-loss single-passband filters in cladding depressed fiber by the chirped-grating concatenation method	1998	Aston University	Electronics-Photonics	Liu, Y Bennion, I Sugden, K
Zhang L	Enhanced FBG strain sensing multiplexing capacity using combination of intensity and wavelength dual-coding technique	1999	Aston University	Electronics-Photonics	Liu, Y Williams, J A R Bennion, I
Zhang L	Design and realization of long-period grating devices in conventional and high birefringence fibers and their novel applications as fiber-optic load sensors	1999	Aston University	Electronics-Photonics	Liu, Y Everall, L Williams, J A R
Zhang L	Optical bend sensor based on measurement of resonance mode splitting of long-period fiber grating	2000	Aston University	Electronics-Photonics	Liu, Y Williams, J A R Bennion, I
Wright M T	The role of integrated passive components in protecting motor windings	2000	Aston University	Systems	Garvey, S D Norris, W T
Wright M T	Performance enhancement through model inversion and optimal profile design	2000	Aston University	Systems	Garvey, S D
Wright M T	The use of identified parameter limits in a robust adaptive controller	1997	Aston University	Systems	Beaven, R W Friswell, M I
Wright M T	Weighting function selection in the H infinity design process	1996	Aston University	Systems	Beaven, R W Seaward, D R
Williams J A R	Fiber Bragg grating fabrication for dispersion slope compensation	1996	Aston University	Electronics-Photonics	Everall, L A Bennion, I Doran, N J
Williams J A R	High-performance microwave transversal filter using fiber Bragg grating arrays	2000	Aston University	Electronics-Photonics	Yu, G Zhang, W
Williams J A R	Frequency response of a tunable fiber-optic Notch filter using a dispersive device	1999	Aston University	Electronics-Photonics	Zhang, W
Williams J A R	Bragg grating fast tunable filter for wavelength division multiplexing	1999	Aston University	Electronics-Photonics	Iocco, A Limberger, H G Salath
Upton D P	An assessment of cutting fluid performance and improvements in surface finish	1996	Aston University	Materials
Upton D P	GB 2 288 029 B: A method of testing cutting fluids to be used in the process of machining, cutting and/or removal of material from metal and/or alloy articles or pieces	1997	Aston University	Materials
Upton D P	Drilling and tapping research in compacted graphite iron carried out for Ford motor company	1999	Aston University	Materials
Upton D P	Optimization of cutting fluid performance	2000	Aston University	Materials
Turitsyn S K	Reduced-power optical solitons in fiber lines with short-scale dispersion management	1999	Aston University	Electronics-Photonics	Fedoruk, M P Gornakova, A
Turitsyn S K	Dispersion-managed soliton in fiber links with in-line filtering presented in the basis of chirped Gauss-Hermite functions	1999	Aston University	Electronics-Photonics	Shapiro, E G
Turitsyn S K	Autosoliton transmission in dispersion-managed systems guided by in-line nonlinear optical loop mirrors	2000	Aston University	Electronics-Photonics	Boscolo, S Nijhof, J H B
Turitsyn S K	Magic dispersion maps for multichannel soliton transmission	2000	Aston University	Electronics-Photonics	Fedoruk, M P Yang, T-S Kath, W L
Tighe B J	Influence of contact lens material surface characteristics and replacement frequency on protein and lipid deposition	1998	Aston University	Materials	Maissa, C Franklin, V J Guillon, M
Tighe B J	Determination of lubricating film thickness for permeable hydrogel and non-permeable polyurethane layers bonded to a rigid substrate with particular reference to cushion form hip joint replacements	1996	Aston University	Materials	McClure, G Jin, Z M Fisher, J
Tighe B J	Examination of particulate macroporous hydrogels in an extracorporeal rat haemoperfusion model	1999	Aston University	Materials	Courtney, J M Murphy, S M Robertson, L M
Tighe B J	Synthetic hydrogels (10): anomalous transport behaviour in crown ether- containing hydrogel membranes	2000	Aston University	Materials	Hamilton, C J Murphy, S M
Thornton C J	Discrete particle simulation of agglomerate impact coalescence	1998	Aston University	Materials	Lian, G Adams, M J
Thornton C J	Numerical simulations of deviatoric shear deformation of granular media	1999	Aston University	Materials
Thornton C J	Quasi-static deformation of particulate media	1998	Aston University	Materials	Antony, S J
Thornton C J	Numerical simulation of the impact fracture and fragmentation of agglomerates	1996	Aston University	Materials	Yin, K K Adams, M J
Sutherland A J	Use of a scintillant-containing macroporous resin in both solid phase synthesis and subsequent on-bead scintillation-based analysis	2000	Aston University	Bio-Engineering	Clapham, B
Sutherland A J	Synthesis and scintillating efficiencies of 4-functionalised-2, 5-diphenyloxazoles	1997	Aston University	Bio-Engineering	Clapham, B Richards, A Wood, M L
Sutherland A J	WO020475A1 (WO1999GB0003296): Solid supports containing scintillant	1998	Aston University	Bio-Engineering	Clapham, B
Sutherland A J	Synthesis and evaluation of a scintillant-containing solid support for use in combinatorial chemistry	2000	Aston University	Bio-Engineering	Clapham, B
Sullivan J L	A study of nitrogen implantation in aluminium - a comparison of experimental results and computer simulation	1999	Aston University	Electronics-Photonics	Sanghera, H K Saied, S O
Sullivan J L	The tribology of flexible magnetic recording media	1996	Aston University	Electronics-Photonics
Sullivan J L	The modelling of radio frequency hydrogen plasmas in the reactive ion etching of GaAs	1997	Aston University	Electronics-Photonics	Layberry, R L Pearce, C G
Sullivan J L	Study of low energy high dose nitrogen implantation in aluminium, iron, copper and gold	1999	Aston University	Electronics-Photonics	Sanghera, H K
St Pourcain B	An infrared study of hydrogen bond stability in benzoic acid-trans-1,2-bis(4-pyridyl)ethylene complexes in the solid state and the implications for the design of supramolecular polymers	1999	Aston University	Bio-Engineering
St Pourcain B	Conformational control by quaternary centres: theory, database evidence and application to polymers	1998	Aston University	Bio-Engineering	Alder, R W Allen, P R Anderson, K R
St Pourcain B	Enzymatic epoxidation of polybutadiene	1998	Aston University	Bio-Engineering	Jarvie, A W P Overton, N
St Pourcain B	Enzyme catalysed modification of synthetic polymers	1999	Aston University	Bio-Engineering	Jarvie, A W P Overton, N
Slater N K H	Synthetic routes to responsive polymers; co-polycondensation of tri-functional amino acids with diacychlorides	1999	Aston University	Bio-Engineering	Eccleston, M E Tighe, B J
Slater N K H	The affinity adsorptive recovery of an infectious herpes simplex virus vaccine	1999	Aston University	Bio-Engineering	O'Keeffe, R S Johnston, M D
Simpson B J	Sustainability and environmental assessment	1996	Aston University	Bio-Engineering
Simpson B J	Green commuter plans	1999	Aston University	Bio-Engineering
Simpson B J	Deregulation and privatization: the British local bus industry following the Transport Act 1985	1996	Aston University	Bio-Engineering
Simpson B J	Road traffic reduction plans	1998	Aston University	Bio-Engineering
Short N R	Determination of bond strength in glass fibre reinforced cement using petrography and image analysis	2000	Aston University	Materials	Purnell, P Buchanan, A J Page, C L
Short N R	Early-age hydration kinetics of polymer-modified cement	1996	Aston University	Materials	Zeng, S Page, C L
Short N R	Accelerated ageing characteristics of glass-fibre reinforced cement made with new cementitious matrices	1999	Aston University	Materials	Purnell, P Page, C L Majumdar, A J
Short N R	The analysis of potentiostatic transients applied to the corrosoin of steel in concrete	1997	Aston University	Materials	Glass, G K Page, C L Zhang, J-Z
Saied S O	Modification of gas separation membranes on a nanometric scale	1997	Aston University	Electronics-Photonics	Toth, A Bertoti, I Khotimsky
Saied S O	Ion bombardment induced compositional changes in GaP and InP surfaces	1998	Aston University	Electronics-Photonics	Yu, W Sullivan, J L Jones, G A C
Saied S O	Surface modification of (100) n-GaAs by radio frequency hydrogen plasmas	1998	Aston University	Electronics-Photonics	Sullivan, J L Layberry, R Cardwell, M J
Saied S O	XPS and LEISS studies of ion bombarded GaSb, InSb and CdSe surfaces	1996	Aston University	Electronics-Photonics	Yu, W Sullivan, J L
Saad D	Typical performance of Gallager-type error-correcting codes	2000	Aston University	Systems	Kabashima, Y Murayama, T
Saad D	Error-correcting codes that nearly saturate Shannon's bound	1999	Aston University	Systems	Kanter, I
Saad D	Globally optimal parameters for on-line learning in multilayer neural networks	1997	Aston University	Systems	Rattray, M
Saad D	Natural gradient descent for on-line learning	1998	Aston University	Systems	Rattray, M Amari, S
Rebollo-Neira L	The cross-Wigner distribution as a generator of frames on the Euclidean plane from frames on the real line	2000	Aston University	Systems	Plastino, A
Rebollo-Neira L	Signal representation for compression and noise reduction through frame-based wavelets	1998	Aston University	Systems	Constantinides, A G Stathaki, T
Rebollo-Neira L	The continuous wavelet transform as a maximum entropy solution of the corresponding inverse problem	1999	Aston University	Systems	Fernandez-Rubio, J
Rebollo-Neira L	Reconstruction of the joint time-delay Doppler-scale reflectivity density in the wide-band regime. A frame theory based approach	2000	Aston University	Systems	Plastino, A Fernandez-Rubio, J
Purkiss J A	Determination of the load-carrying capacity of steel fibre reinforced concrete beams	1997	Aston University	Materials	Wilson, P J Blagojevic, P
Purkiss J A	An investigation into the influence of concrete constitutive models on the behaviour of reinforced concrete columns exposed to fire	1996	Aston University	Materials	Mustapha, K N
Purkiss J A	Fire resistance of reinforced concrete columns - correlation of analytical methods with observed experimental behaviour	1996	Aston University	Materials	Morris, W A Connolly, R J
Purkiss J A	Fire safety engineering design of structures	1996	Aston University	Materials
Penny J E T	Extracting second-order systems from state-space representations	1999	Aston University	Systems	Friswell, M I Garvey, S D
Penny J E T	The application of the IRS and balanced realisation methods to obtain reduced models of structures with local nonlinearities	1996	Aston University	Systems	Friswell, M I Garvey, S D
Penny J E T	A combined genetic and eigensensitivity algorithm for the location of damage in structures	1998	Aston University	Systems	Friswell, M I Garvey, S D
Penny J E T	The convergence of the iterated IRS method	1998	Aston University	Systems	Friswell, M I Garvey, S D
Opper M	Mutual information, metric entropy and cumulative relative entropy risk	1997	Aston University	Systems	Haussler, D
Opper M	On-line versus off-line learning from random examples: general results	1996	Aston University	Systems
Opper M	Gaussian processes for classification: mean-field algorithms	2000	Aston University	Systems	Winther, O
Opper M	Statistical mechanics of support vector networks	1999	Aston University	Systems	Dietrich, R Sompolinsky, H
Norris W T	Exact analysis of a multipulse shunt converter compensator or Statcon. Part I: Performance	1997	Aston University	Systems	Hill, J E
Norris W T	Capacitor-assisted excitation of permanent-magnet generators	1998	Aston University	Systems	Chen, Z Spooner, E Williamson, A C
Norris W T	Exact analysis of a multipulse shunt convertor compensator or Statcon. Part II: Analysis	1997	Aston University	Systems	Hill, J E
Norris W T	The influence of geometry on self-field AC losses of Ag sheathed PbBi2223 tapes	1996	Aston University	Systems	Yang, Y Hughes, T Beduz, C
Nabney I T	Bayesian inference for wind field retrieval	2000	Aston University	Systems	Cornford, D Williams, C K I
Nabney I T	Neural network control of a gas turbine	1996	Aston University	Systems	Cressy, D C
Nabney I T	Modeling conditional probability distributions for periodic variables	1996	Aston University	Systems	Bishop, C M
Nabney I T	Structured neural network modelling of multi-valued functions for wind vector retrieval from satellite scatterometer measurements	2000	Aston University	Systems	Evans, D J Cornford, D
Mezentzev V	Self-guiding light in layered nonlinear media	2000	Aston University	Electronics-Photonics	Berg Juul Rasmussen, J Leth Christiansen, P
Mezentzev V	System optimisation of 80 Gbit/s single channel transmission over 1000 km of standard fibre	2000	Aston University	Electronics-Photonics	Turitsyn, S K Doran, N J
Mezentzev V	Novel approaches to numerical modelling of periodic dispersion-managed fiber communication systems	2000	Aston University	Electronics-Photonics	Turitsyn, S K Fedoruk, M P Shapiro, E G
Mezentzev V	Symmetries, chirp-free points, and bistability in dispersion-managed fiber lines	1999	Aston University	Electronics-Photonics	Turitsyn, S K Nijhof, J H B Doran, N J
McWhinnie W R	Heterocyclic organotellurium compounds as precursors for new organometallic derivatives of rhodium	1997	Aston University	Bio-Engineering	Badyal, K Chen, H L Hamor, T A
McWhinnie W R	The reactions of heterocyclic organotellurium and selenium compounds with triiron dodecacarbonyl	1998	Aston University	Bio-Engineering	Majeed, Z Paxton, K Hamor, T A
McWhinnie W R	E.s.r. studies of five coals before and after reaction with spin traps (microwave-driven) - E.s.r. and XPS of the coals following reaction with diiodine	1996	Aston University	Bio-Engineering	Monsef-Mirzai, P
McWhinnie W R	Reaction of Fe3 (CO)12 with tellurium-nitrogen heterocycles: a source of novel organoiron compounds	1997	Aston University	Bio-Engineering	Badyal, K Hamor, T A Chen, H
Lowe D	Point-wise confidence interval estimation by neural networks: a comparative study based on automotive engine calibration	1999	Aston University	Systems	Zapart, C
Lowe D	Characterising complexity by the degrees of freedom in a radial basis function network	1998	Aston University	Systems
Lowe D	Feed-forward neural networks and topographic mappings for exploratory data analysis	1996	Aston University	Systems	Tipping, M
Lowe D	Shadow targets: a novel algorithm for topographic projections by radial basis functions	1998	Aston University	Systems	Tipping, M E
Li L Y	Adaptive finite element methods: a review	1997	Aston University	Materials	Bettess, P
Li L Y	Error estimates and adaptive remeshing techniques in elasto-plasticity	1997	Aston University	Materials	Bettess, P
Li L Y	Finite element modelling of chloride removal from concrete by an electrochemical method	2000	Aston University	Materials	Page, C L
Li L Y	Modelling of electrochemical chloride extraction from concrete: influence of ionic activity coefficients	1998	Aston University	Materials	Page, C L
Krushchev I	Multiwavelength pulse source for OTDM/WDM applications based on arrayed waveguide grating	1999	Aston University	Electronics-Photonics	Bainbridge, J D Whiteaway, J E A White, I H
Krushchev I	Improvement of short pulse operation of AlGaAs quantum-well lasers by temperature increase	1998	Aston University	Electronics-Photonics	White, I H Penty, R V
Krushchev I	Nonlinear suppression of incoherent interferometric crosstalk using dispersion-imbalanced loop mirror	2000	Aston University	Electronics-Photonics	Chai, Y J White, I H
Krushchev I	High-quality laser diode pulse compression in a dispersion-imbalanced loop mirror	1998	Aston University	Electronics-Photonics	White, I H Penty, R V
Kochhar A K	Case studies based development of a rule-base for the specification of manufacturing planning and control systems	2000	Aston University	Systems	Howard, A Dilworth, J
Kochhar A K	Knowledge-based systems approach to the development of accurate and realistic master production schedules	1998	Aston University	Systems	Ma, X Khan, M N
Kochhar A K	An analytic hierachy process approach to the choice of manufacturing plant layout	1999	Aston University	Systems	Abdul-Hamid, Y T Khan, M K
Kochhar A K	A framework for the selection of best practices	2000	Aston University	Systems	Davies, A J
Kettle R J	Abrasion resistance in concrete and the new BS 8204: part 2	2000	Aston University	Materials	Sadegzadeh, M
Kettle R J	Abrasion resistance of fibre reinforced concrete floors	2000	Aston University	Materials	Vassou, V
Kettle R J	The role of moisture in abrasion resistance	1999	Aston University	Materials	Webb, M
Kettle R J	Abrasion resistance of concrete containing lower grade aggregates	1996	Aston University	Materials	Webb, M Collins, R J
Jones B J	Pulse width modulated reinforced piezo air jet actuators	1997	Aston University	Systems	Zhao, Y
Jones B J	Neural network control strategies for low specification servo actuators	1998	Aston University	Systems	Wong, C F Shippen, J
Jones B J	Robust backstepping and neural network control of a low-quality nonholomonic mobile robot	1999	Aston University	Systems	Zhang, Q Shippen, J
Jones B J	Peak expiratory flow profiles delivered by pump systems - limitations due to wave action	2000	Aston University	Systems	Miller, M R Xu, Y Pedersen, O F
James C	Using weighted linear spatial decomposition to investigate brain activity through a set of fixed current dipoles	2000	Aston University	Systems	Kobayashi, K Gotman, J
James C	Detection of epileptiform discharges in the EEG by a hybrid system comprising mimetic, self-organized artificial neural network, and fuzzy logic stages	1999	Aston University	Systems	Jones, R D Bones, P J Carroll, G J
James C	Multireference adaptive noise canceling applied to the EEG	1997	Aston University	Systems	Hagan, M T Jones, R D Bones, P J
James C	Using dynamical embedding to isolate seizure components in the Ictal EEG	2000	Aston University	Systems	Lowe, D
Jain S	Zero-temperature dynamics of the weakly disordered Ising model	1999	Aston University	Systems
Jain S	Persistence in the zero-temperature dynamics of the diluted Ising ferromagnet in two dimensions	1999	Aston University	Systems
Homer J	Accelerated relaxation of sensitive nuclei for enhancement of signal-to-noise with time	1997	Aston University	Bio-Engineering	Perry, M C Palfreyman, S A
Homer J	Preliminary nuclear magnetic resonance studies of the use of stray magnetic fields to increase the rate of polarization of dipolar nuclei	1999	Aston University	Bio-Engineering	Robson, J H Muller D R
Homer J	Evaluation of a model for the prediction of phase equilibria from general molecular parameters. 2. Binary liquid-liquid equilibria at low pressures	1996	Aston University	Bio-Engineering	Kakhu, A I
Homer J	Evaluation of a model for the prediction of phase equilibria from general molecular parameters 1: vapour-liquid equilibria and enthalpy at low pressures	1996	Aston University	Bio-Engineering	Kakhu, A I
Holding D J	Verification of a hybrid model of a manufacturing system using rectangular petri nets	2000	Aston University	Systems	Bordbar, B Giacomini, L
Holding D J	Hybrid sliding mode control for a set of interconnected nonlinear components	2000	Aston University	Systems	Giacomini, L Bordbar, B
Holding D J	Real-time synchronisation of multiaxis high-speed machines, from SFC specification to Petri net verification	1996	Aston University	Systems	Jiang, J Azzopardi, D Carpenter, G F
Holding D J	Petri nets and OMT for modelling and analysis of DEDS	1997	Aston University	Systems	Azzopardi, D
Hedges P	The relationship between settling velocity grading and the characteristics of the contributing catchment	1996	Aston University	Bio-Engineering	Tyack, J N Smisson, R P M
Hedges P	Getting maximum yield from surface mining land by reclaiming pits with municipal waste	1997	Aston University	Bio-Engineering	Aston, R L
Hedges P	The application of settling velocity as a parameter for characterising wastewater solids	1998	Aston University	Bio-Engineering	Becker, F A Smisson, R P M
Hedges P	Environmental impacts of groundwater exploitation using GIS	1999	Aston University	Bio-Engineering	Charnock, T W
Generalis S	A pseudo-three-dimensional two-phase turbulent fluid mechanical model for the prediction of liquid flow patterns with a free surface in a shallow channel	1999	Aston University	Bio-Engineering	Walton, A G Porter, K E
Generalis S	Using computational fluid dynamics to investigate the flow of a viscous fluid in a cavity with oscillating boundaries	1999	Aston University	Bio-Engineering	Overd, M M
Generalis S	Artificial neural networks for the prediction of liquid viscosity, density, heat of vaporization, boiling point and Pitzer's acentric factor. Part 1: Hydrocarbons	1999	Aston University	Bio-Engineering	Homer, J Robson, J H
Generalis S	Flow field analysis of both the trilobal element and mixing disc zones within a closely intermeshing, co-rotating twin-screw extruder	1997	Aston University	Bio-Engineering	Bruce, D Wilson, M P
Garvey S	Quantifying the correlation between measured and computed mode shapes	1996	Aston University	Systems	Penny, J E T Friswell, M I
Garvey S	Some further insight into self-adjoint second-order systems	1999	Aston University	Systems	Friswell, M I Penny, J E T
Forysiak W	Dispersion-managed solitons in the normal dispersion regime: a physical interpretation	1998	Aston University	Electronics-Photonics	Nijhof, J H B Doran, N J
Forysiak W	Dispersion-managed soliton propagation in short-period dispersion maps	2000	Aston University	Electronics-Photonics	Richardson, L J Doran N J
Forysiak W	Soliton collisions with wavelength-division multiplexed systems with strong dispersion management	1998	Aston University	Electronics-Photonics	Niculae, A M Gloag, A J Nijhof, J H B
Forysiak W	Soliton transmission using periodic dispersion compensation	1997	Aston University	Electronics-Photonics	Smith, N J Doran, N J Knox, F M
Fermin I V	Voting method for planarity and motion detection	1999	Aston University	Systems	Imiya, A
Fermin I V	Planar motion detection by randomized triangle matching	1997	Aston University	Systems	Imiya, A
Fermin I V	Two probabilistic algorithms for planar motion detection	1997	Aston University	Systems	Imiya, A Ichikawa, A
Fermin I V	Indexing method for three-dimensional position estimation	1999	Aston University	Systems	Semwal, S Ohya, J
Doran N J	10-Gbit/s dispersion-managed soliton transmission over 16,500km in standard fiber by reduction of soliton interactions	1999	Aston University	Electronics-Photonics	Penketh, I S Harper, P Alleston, S B
Doran N J	40Gbit/s dispersion managed soliton transmission over 1160km in standard fibre with 75km span length	1999	Aston University	Electronics-Photonics	Harper, P Alleston, S B Bennion, I
Doran N J	Stable soliton-like propagation in dispersion managed systems with net anomalous, zero and normal dispersion	1997	Aston University	Electronics-Photonics	Nijhof, J H B Forysiak, W Knox, F M
Doran N J	Enhanced power solitons in optical fibres with periodic dispersion management	1996	Aston University	Electronics-Photonics	Smith, N J Knox, F M Blow, K J
Dennis J K	Electrochemical studies on the corrosion of a range of zinc alloy coated steel in alkaline solutions	1996	Aston University	Materials	Short, N R Zhou, S
Dennis J K	Corrosion resistance of zinc-alloy coated steel in construction industry environments	1997	Aston University	Materials	Short, N R
Dennis J K	A study of wear resistance of a new brush-plated alloy Ni-Fe-W-S	1996	Aston University	Materials	Hui, W-H Liu, J-J Chaug, Y-S
Dennis J K	Microstructure and hardness of brush plated Ni-Fe-W-P-S alloy	1997	Aston University	Materials	Hui, W-H Liu, J-J
Cornford D	A scatterometer neural network sensor model with input noise	2000	Aston University	Systems	Ramage, G Nabney, I T
Cornford D	Adding constrained discontinuities to Gaussian process models of wind fields	1998	Aston University	Systems	Nabney, I T Williams, C K I
Cornford D	Neural network-based wind vector retrieval from satellite scatterometer data	1999	Aston University	Systems	Nabney, I T Bishop, C M
Cornford D	Neural network modelling with input uncertainty: theory and application	2000	Aston University	Systems	Wright, W A Ramage, G Nabney, I T
Cooper M J	A safety management approach to the 'year 2000' problem	1999	Aston University	Bio-Engineering	Van den Dries, J
Cooper M J	Safety management in the emergency response services	2000	Aston University	Bio-Engineering
Cooper M J	Safety training - a special case?	2000	Aston University	Bio-Engineering	Cotton, D
Cooper M J	A risk-based approach to vehicle safety	1998	Aston University	Bio-Engineering
Bridgwater A V	Production of high grade fuels and chemicals from catalytic pyrolysis of biomass	1996	Aston University	Bio-Engineering
Bridgwater A V	An overview of fast pyrolysis of biomass	1999	Aston University	Bio-Engineering	Meier, D Radlein, D
Bridgwater A V	Principles and practice of biomass fast pyrolysis processes for liquids	1999	Aston University	Bio-Engineering
Bridgwater A V	Fast pyrolysis processes for biomass	2000	Aston University	Bio-Engineering	Peacocke, G V C
Brett P N	A technique for measuring contact force distribution in minimally invasive surgical procedures	1997	Aston University	Systems	Stone, R S W
Brett P N	A mechatronic drilling tool for ear surgery: a case study of some design characteristics	1996	Aston University	Systems	Baker, D Griffiths, M V Reyes, L
Booth R T	Safety and health management system guidance: a review founded on BS8800:1996	1998	Aston University	Bio-Engineering	Hawkins, J
Booth R T	The performance of health and safety specialists in a simulated risk assessment task	2000	Aston University	Bio-Engineering	Hartley, C B
Booth R T	Occupational Safety	1996	Aston University	Bio-Engineering
Booth R T	Challenges and opportunities facing the Institution of Occupational Safety and Health	2000	Aston University	Bio-Engineering
Blow K J	Semiconductor laser amplifiers for ultrafast all-optical signal processing	1997	Aston University	Electronics-Photonics	Manning, R J Ellis, A D Poustie, A J
Blow K J	All-optical regenerative memory with full write/read capability	1998	Aston University	Electronics-Photonics	Poustie, A J Kelley, A E Manning, R J
Blow K J	All-optical parity checker with bit-differential delay	1999	Aston University	Electronics-Photonics	Poustie, A J Kelley, A E Manning, R J
Blow K J	Advances in nonlinear optics for information processing and all-optical networking	1996	Aston University	Electronics-Photonics	Smith, K Lucek, J K Manning, R J
Bennion I	Fabrication and characterization of bandpass filters based on concatenated chirped fiber gratings	1997	Aston University	Electronics-Photonics	Sugden, K Zhang, L Williams, J A R
Bennion I	1000km transmission of 40Gbit/s single channel RZ data over dispersion managed standard (non-dispersion shifted) fibre	1999	Aston University	Electronics-Photonics	Alleston, S B Harper, P Penketh, I S
Bennion I	Drop and insert multiplexing with simultaneous clock recovery using an electroabsorption modulator	1998	Aston University	Electronics-Photonics	Phillips, I D Gloag, A Moodie, D G
Bennion I	Multiplexed identical broad-band-chirped grating interrogation system for large-strain sensing applications	1997	Aston University	Electronics-Photonics	Fallon. R W Zhang, L Gloag, A
Beevers M S	Cyclic polysiloxanes: 6. Dielectric relaxation of polymethylphenylsiloxanes	1996	Aston University	Materials	Goodwin, A A Clarson, S J Semlyen, J A
Beevers M S	Studies of cyclic and linear polydimethylsiloxanes: 32. Dielectric relaxation investigations	1996	Aston University	Materials	Goodwin, A A Clarson, S J Semlyen, J A
Beevers M S	Temperature dependence of static dielectric permitivity and dipole moments of poly (N-vinylcarbazole)	1996	Aston University	Materials	Fiaz, M
Beevers M S	Synthesis and Kerr effect of p-Phenylene Vinylene Oligomers	1996	Aston University	Materials	Goodwin, A A
Barnes A	A comment on a paper by Carot et al	2000	Aston University	Systems
Barnes A	A Comment on a Paper by Dadhich and Patel	1998	Aston University	Systems
Barnes A	On Stephani's rotating dust solutions	1999	Aston University	Systems
Barnes A	Symmetries of the Stephani universes	1998	Aston University	Systems
Barber D	Finite-size effects in on-line learning of multilayer neural networks	1996	Aston University	Systems	Saad, D Sollich, P
Barber D	Does extra knowledge necessarily improve generalization?	1996	Aston University	Systems	Saad, D
Barber D	Online learning from finite training sets and robustness to input bias	1998	Aston University	Systems	Sollich, P
Barber D	Bayesian classification with Gaussian processes	1998	Aston University	Systems	Williams, C K I
Amass A J	Polylactic acids produced from L- and DL-lactic acid anhydrosulfite: stereochemical aspects	1999	Aston University	Materials	N'Goala , K L R Tighe, B J Schue, F
Amass A J	N-alkyl-2-pyridinemethanimine mediated atom transfer radical polymerisation of styrene: the transition from heterogeneous to homogeneous catalysis	2000	Aston University	Materials	Wyres, C A Colcough, E Hohn, I M
Amass A J	Synthesis and characterization of a,w-hydroxy and nitrato telechelic oligomers of 3,3-(nitratomethyl) methyl oxetane (NIMMO) and glycidyl nitrate (GLYN)	1996	Aston University	Materials	Desai, H J Cunliffe, A V Hamid, J
Amass A J	A review of biodegradable polymers: uses, current developments in the synthesis and characterization of biodegradable polyesters, blends of biodegradable polymers and recent advances in biodegradation studies	1998	Aston University	Materials	Amass, W Tighe, B J
Al-Malaika S	The antioxidant role of a-tocopherol in polymers III. Nature of transformation products during polyolefins extrusion	1999	Aston University	Materials	Issenhuth, S
Al-Malaika S	Hydroperoxide decomposing ability and hydrolytic stability of organic phosphites containing hindered amine moieties (HALS-Phosphites)	1998	Aston University	Materials	Bauer, I Korner, S Pawelke, B
Al-Malaika S	The antioxidant role of a-tocopherol in polymers II. Melt stabilising effect in polypropylene	1999	Aston University	Materials	Goodwin, C Issenhuth, S Burdick, D
Al-Malaika S	Chemical modification of polymer blends by reactive processing: in situ reactions of interlinking agents in PS/EPDM blends	1998	Aston University	Materials	Artus, K
Zhou E	Improving error compensation via a fuzzy -neural hybrid model.	1999	Bolton Institute of HE		D Harrison
Zhou E	Effecting in -cycle measurement with preteritic CNC machine tools.	1996	Bolton Institute of HE		D Harrison D Link
Zhou E	Analytical model for quality inspection of laser marking / glazing clay tiles.	2000	Bolton Institute of HE		A Peligrad D Morton L Lin
Zhou E	Fuzzy ignition timing control for a spark ignition engine.	2000	Bolton Institute of HE		W Wang E Chirwa K Holmes
Sarsby R	Environmental geotechnics.	2000	Bolton Institute of HE		S Anand M Pritchard
Sarsby R	A numerical investigation of landfill hydraulics using variably saturated flow theory.	1996	Bolton Institute of HE		J R McDougall N J Hill
Sarsby R	The composition of leachate from landfilled refuse.	1996	Bolton Institute of HE		J Gettinby C Nedwell
Sarsby R	Problems in defining the geotechnical behaviour of wastewater sludges.	1999	Bolton Institute of HE		A Klein
Olubodun F	The impact of tenants on public housing stock maintenance expenditure in the UK	1997	Bolton Institute of HE		T Mole
Olubodun F	Evaluation of defect influencing factors in public housing in the UK	1999	Bolton Institute of HE		T Mole
Olubodun F	A factor approach to the analysis of component defects in housing stock	2000	Bolton Institute of HE
Olubodun F	Evaluating the causes of housing defects: a regression model approach	1998	Bolton Institute of HE		T Mole
Myler P	Characterisation and limitation of ultrasonic C-scan and X-ray techniques	2000	Bolton Institute of HE		B Henderson S C Anand
Myler P	Flame retardant properties of novel fibre-reinforced composite materials	2000	Bolton Institute of HE		B K Kandola A R Horrocks D Blair
Myler P	Matrix influence within quasi-isotropic epoxy carbon fibre reinforced composites in the evaluation of post-impact compression performance after a barely visible impact damage (BVID)	2000	Bolton Institute of HE		B Henderson S C Anand
Myler P	Burning behaviour of fibre-reinforced composites and the role of char formation	2000	Bolton Institute of HE		A R Horrocks B Kandola
Morton D	Genetic algorithm modelling and solution of inspection path planning on a co-ordinate measuring machine	1999	Bolton Institute of HE		C G Lu P Myler M H Wu
Morton D	Electrical conduction at high fields in oil impregnated paper.	1996	Bolton Institute of HE		J H Calderwood
Morton D	Dynamic calibration of CNC machine tools.	1997	Bolton Institute of HE		S R Postlethwaite D G Ford
Morton D	Investigation of sensing technology for automatic control of three-dimensional laser marking.	1999	Bolton Institute of HE		A Peligrad L Li E Zhou
Dodds D	The shape and propagation of systematic pulsatile blood pressure during the evolution of porcine haemorrhagic shock.	2000	Bolton Institute of HE		P Dark J Atherton J Purdy
Dodds D	Systematic arterial pressure wave reflections during haemorrhage.	2000	Bolton Institute of HE		P Dark J Atherton J Purdy
Dodds D	Placement of electrodes for defibrillation - a review of the evidence.	2000	Bolton Institute of HE		C Moulton C Dreyer D W Yates
Dodds D	The PEP transducer: A new way of measuring the respiratory rate in the non-intubated patient.	1999	Bolton Institute of HE		J Purdy C Moulton
Convey H	Optimisation under constraints for automated multi-drilling head techniques.	2000	Bolton Institute of HE		G Klene A Grauel A J Hartley
Convey H	Automated multi-drilling gear design in the framework of computational intelligence.	2000	Bolton Institute of HE		G Klene A Grauel A J Hartley
Convey H	Intelligent data analysis for design of multi-drilling gear machines.	2000	Bolton Institute of HE		G Klene A Grauel A J Hartley
Convey H	Intelligent multi-drilling gear optimisation for industrial automation.	2000	Bolton Institute of HE		G Klene A Grauel A J Hartley
Chirwa EC	Airbag head restraint system.	2000	Bolton Institute of HE		J Latchford
Chirwa EC	Real european road accidents, their reconstruction and interpretation when designing for crashworthiness.	1997	Bolton Institute of HE
Chirwa EC	A study on large deflection of thin-walled tubes under pure bending.	1997	Bolton Institute of HE		C-S Kim Y-R Lee T-E Chung
Chirwa EC	Crashworthiness of vehicle composite panels and components.	1997	Bolton Institute of HE
Binkley J	Photofading behaviour of C.I. Disperse Orange 1 and C.I. Disperse Orange 3 in solution and polymer substrates.	1999	Bolton Institute of HE		T M Evans A R Horrocks
Binkley J	Biochemical treatment of recalcitrant dyestuff effluent.	1998	Bolton Institute of HE		T M Evans J Hargreaves G Smart
Binkley J	Removal of activated sludge bound metals by precipitation.	2000	Bolton Institute of HE		J Simpson P McMahon
Binkley J	Textile activated sludge characterisation by conductivity and pH measurement.	2000	Bolton Institute of HE		J Simpson P McMahon
Wynne R J	'The application of principal component analysis and kernel density estimation to enhance process monitoring	2000	Bournemouth University	Academic Biomedical Engineering	Chen, Q. Goulding, P. Sandoz, D.
Wynne R J	Robust strategies for active vibration control of plate-like structures: theory and experiment	1999	Bournemouth University	Academic Biomedical Engineering	Sadri, A.M. Wright J.R.
Wood D E	Controlling FES Assisted Paraplegic Standing - A Case Study	1999	Bournemouth University	Academic Biomedical Engineering	Dunkerley, A.L.
Wood D E	FES cycling may promote recovery of leg function after incomplete spinal cord injury	2000	Bournemouth University	Academic Biomedical Engineering	Donaldson, N. Perkins, T.A. Fitzwater, R.
Wood D E	Apparatus to measure simultaneously 14 isometric leg joint moments. Part 1: Design and calibration of six-axis transducers for the forces and moments at the ankle	1999	Bournemouth University	Academic Biomedical Engineering	Donaldson, N. de N. Munih, M. Perkins, T.A.
Wood D E	Apparatus to measure simultaneously 14 isometric leg joint moments. Part 2: Multi-moment chair system	1999	Bournemouth University	Academic Biomedical Engineering	Donaldson, N. de N. Perkins, T.A.
Vasilko M	A Technique for Modelling Dynamic Reconfiguration with Improved Simulation Accuracy	1999	Bournemouth University	Microelectronics and Multimedia Communications	Cabanis, D.
Vasilko M	DYNASTY: A Temporal Floorplanning based CAD Framework for Dynamically Reconfigurable Logic Systems	1999	Bournemouth University	Microelectronics and Multimedia Communications
Vasilko M	RIFLE-62: A Flexible Environment for Prototyping Dynamically Reconfigurable Systems	1998	Bournemouth University	Microelectronics and Multimedia Communications	Long, D.
Vasilko M	Improving Simulation Accuracy in Design Methodologies for Dynamically Reconfigurable Logic Systems	1999	Bournemouth University	Microelectronics and Multimedia Communications	Cabanis, D.
Taylor P N	Clinical audit of 5 years provision of the Odstock Drop Foot Stimulator (ODFS)	1999	Bournemouth University	Academic Biomedical Engineering	Burridge, J.H. Dunkerley, A. Wood, D.E.
Taylor P N	Long Pulse Biphasic Electrical Stimulation of Denervated Muscle	1999	Bournemouth University	Academic Biomedical Engineering	Woodcock, A.H. Ewins, D.J.
Taylor P N	Clinical use of the Odstock Drop Foot Stimulator: Its effect on the speed and effort of walking	1999	Bournemouth University	Academic Biomedical Engineering	Burridge, J.H. Dunkerley, A.L. Wood, D.E.
Taylor P N	Patients' perceptions of the Odstock Drop Foot Stimulator (ODFS)	1999	Bournemouth University	Academic Biomedical Engineering