Metallurgy and Materials - Publications

---

Metallurgy and Materials RDF, 1.9mb <RDF Zip, 149kb>
People, 181kb	Publications, 867kb	Groups, 21kb	Institutions, 28kb

BOTTOM

• 1753 Publication References

Author	Title	Date	Place of Publication	Research Group	Co-Authors
Turgoose S	Effect of Corrosion Inhibitors on Scale Removal During Pickling of Mild Steel	2000	UMIST	Corrosion and Protection	A A El-Meligi A A Ismail S H Sanad
McLaughlin JA	The effect of the substrate bias on the Raman spectra and thermal stability of diamond-like carbon (DLC) and silicon-modified DLC films prepared by plasma-enhanced chemical vapour deposition (PECVD)	1999	University of Ulster	Thin Films Group	A A Ogwu R W Lamberton P D Maguire
McLaughlin JA	Characterisation of thermally annealed diamond like carbon (DLC) and silicon modified DLC films by Raman spectroscopy	1999	University of Ulster	Thin Films Group	A A Ogwu R W Lamberton S Morley
O'Brien M G	Factors affecting work of fracture of a PVC film	1999	University of North London		A Arkhireyeva S Hashemi
Hand RJ	An Hypothesis on the Nature of Griffith's Cracks in Alkali Silicate and Silica Glasses	1997	University of Sheffield	Ceramics and Glass	A B Seddon
Wright PV	Progress in Smart Microwave Materials and Structures	2000	University of Sheffield	Polymers and Polymer Matrix Composites	A Barnes B Chambers K Lees
Abraham D	Highly Conducting Polymer Blend Films of Polyaniline and Nylon 6 by Cosolvation in an Organic Acid	1996	Heriot-Watt University	Textile Science + Technology	A Bharati S. V. Subramanyam
Parker JM	Neutron Diffraction Analysis of the Atomic Short Range Order in Lead Gallate Glasses	1998	University of Sheffield	Ceramics and Glass	A C Hannon B Vessal
Parker JM	The Structure of Aluminate Glasses by Neutron Diffraction.	2000	University of Sheffield	Ceramics and Glass	A C Hannon
Prangnell P B	The Solidification Behaviour of Dilute Aluminium-Scandium Alloys	1998	UMIST	Process Control	A F Norman R S McEwen
Prangnell P B	Effect of Welding Parameters on the Solidification Microstructure of Autogenous TIG Welds in an Al-Cu-Mg-Mn Alloy	1999	UMIST	Process Control	A F Norman V Drazhner
Alderson KL	The strain dependent indentation resilience of auxetic microporous polyethylene.	2000	Bolton Institute of HE	Materials Physics	A Fitzgerald K Evans
Prangnell P B	The Effect of Strain Path on the Development of Deformation Structures in Severely Deformed Aluminium Alloys Processed by ECAE	2000	UMIST	Process Control	A Gholinia M Markushev
Mills NJ	Creep and recovery of polyolefin foams - Deformation mechanisms.	1997	University of Birmingham		A Gilchrist
Jones H	Solidification Microstructure Selection in the Al-rich Al-La, Al-Ce and Al-Nd Systems	1999	University of Sheffield	High Performance Metallics and Process Modelling	A Hawksworth W M Rainforth
Anand SC	Textile materials for medical and healthcare applications.	1997	Bolton Institute of HE	Textile Materials	A J Rigby A R Horrocks
Stanford J L	A Synchrotron X-Ray Study of Melting and Recrystallization in Isotactic Polypropylene	1997	UMIST	Paper Physics	A J Ryan W Bras T M W Nye
Jones H	Growth Temperature Measurements and Solidification Microstructure Selection of Primary Al3Ni and Eutectic in the Al-Al3Ni System	1998	University of Sheffield	High Performance Metallics and Process Modelling	A Juarez-Hernandez
Scantlebury J D	Mechanism of Friedel's Salt Formation in Cements Rich in Tri-Calcium Aluminate	1996	UMIST	Corrosion and Protection	A K Surayavanshi S B Lyon
Lyon S B	Effect of Water and its Activity on Transport Properties of Glass/Epoxy Particulate Composites	1997	UMIST	Corrosion and Protection	A Lekatou S E Faidi D Ghidaoui
Brown D	The development of a dielectric system for the on-line cure monitoring of the resin transfer moulding process	2000	University of Ulster	Engineering Composites Research Centre	A McIlhagger B Hill
Marrow T J	The Crack Initiation Toughness for Brittle Fracture of Super Duplex Stainless Steel	1997	UMIST	Process Control	A O Humphreys M Strangwood
Withers PJ	A Neutron Diffraction Study of Load Partitioning in Continuous Ti/SiC Composites	1998	University of Manchester	Metallic Materials	A P Clarke
Holmes D	Concurrent determination of absorption and wickability of fabrics.	2000	Bolton Institute of HE	Textile Materials	A P D'Silva C Greenwood S C Anand
Dharmadasa I M	Electrodeposited p-type and n-type ZnSe layers for light emitting devices and multi-layer tandem solar cells	1999	Sheffield Hallam University	Innovative Spectroscopy, Microscopy and Analysis	A P Samantilleke J Young M H Boyle
Alderson KL	The effects of powder morphology on the processing of auxetic polypropylene.	1996	Bolton Institute of HE	Materials Physics	A Pickles K Evans
Atkinson HV	Anomalous Rheological Behaviour of Semi-Solid Alloy Slurries at Low Shear Rates	1997	University of Sheffield	High Performance Metallics and Process Modelling	A R A McLelland N G Henderson D H Kirkwood
Miraftab M	The influence of carbon black on properties of oriented polypropylene. Part 1: Tensile and physical properties.	1999	Bolton Institute of HE	Textile Materials	A R Horrocks J Mwila
Miraftab M	The influence of carbon black on properties of oriented polypropylene. Part 2: Thermal and photodegradation.	1999	Bolton Institute of HE	Textile Materials	A R Horrocks J Mwila M Liu
Miraftab M	Carpet waste, an expensive luxury we must do without!	1999	Bolton Institute of HE	Textile Materials	A R Horrocks C Woods
Kandola B	Flame retardant treatments of cellulose and their influence on the mechanism of cellulose pyrolysis.	1996	Bolton Institute of HE	Textile Materials	A R Horrocks D Price G Coleman
Kandola B	Complex char formation in flame retarded fibre intumescent combinations. Part 2 - Thermal analytical studies.	1996	Bolton Institute of HE	Textile Materials	A R Horrocks
Kandola B	Complex char formation in flame-retarded fibre-intumescent combinations IV. Mass loss and thermal barrier properties.	2000	Bolton Institute of HE	Textile Materials	A R Horrocks
Hall ME	Environmental consequences of using flame retardant textiles - a simple life cycle analytical model.	1997	Bolton Institute of HE	Textile Materials	A R Horrocks D Roberts
Hall ME	Flame retardant textile back coatings. Part 2: Effectiveness of phosphorus-containing flame retardants in textile back-coating formulations.	2000	Bolton Institute of HE	Textile Materials	A R Horrocks M Y Wang F Sunmonu
Davies P	Optimisation of flame retardant textile coating parameters by factorial analysis.	1999	Bolton Institute of HE	Textile Materials	A R Horrocks
Davies P	Char formation in flame retarded wool fibres. Part 1: Effect of intumescent on thermogravimetric behaviour.	2000	Bolton Institute of HE	Textile Materials	A R Horrocks
Davies P	Scanning electron microscopic studies of wool/intumescent char formation.	2000	Bolton Institute of HE	Textile Materials	A R Horrocks M Miraftab
Davies P	Effect of recycled polyolefin inclusion on the properties of polypropylene filaments. Part 1: Physicochemical properties.	2000	Bolton Institute of HE	Textile Materials	A R Horrocks
Miraftab M	Development of novel structures for woundcare.	1996	Bolton Institute of HE	Textile Materials	A Rigby S Anand G Collyer
Greenwood GW	Microstructural Stability of Creep Resistant Alloys for High Temperature Plant Applications	1998	University of Sheffield	High Performance Metallics and Process Modelling	A Strong J Cawley
Lorimer GW	Dispersoids in Al-Li AA8090 Series Alloys	1997	University of Manchester	Metallic Materials	A Waheed
Harris IR	Low pressure pack sublimation: Newly developed zinc coating process.	2000	University of Birmingham		A Walton JD Speight
Cooke WD	The Cleaning of Degraded Linen Part 1 and 2.	1996	UMIST	Paper Physics	A. Babakhani
Kiely CJ	Structural modifications observed in a VMgO catalyst under reaction conditions.	1999	University of Liverpool	Functional Materials	A. Burrows G. Vorbeck J. Perregaard
Porat I	Two-dimensional Analysis of Card Web Irregularity	2000	UMIST	Process Control	A. Cherkassky B. Kit
Dias T	A Study of Graphical Representation of Plain Knitted Structures, Part 1: Stitch Model	2000	UMIST	Process Control	A. Demiroz
Dias T	A study of Graphical Representation of Plain Knitted Structures, Part 2: Experimental Studies and Generation of Structures.	2000	UMIST	Process Control	A. Demiroz
Gong RH	Image Analysis Techniques, Part II: The Measurement of Fibre Orientation in Nonwovens.	1996	UMIST	Process Control	A. Newton
Tatlock GJ	A study of the oxidation of the sulphur passivated Ni(100) Surface by STM.	1997	University of Liverpool	Structural Materials	A. Partridge F.M. Leibsle
Pond RC	Dislocation in interfaces in the H.C.P. metals - II. Mechanisms of defect mobility under stress.	1999	University of Liverpool	Structural Materials	A. Serra D.J. Bacon
Bacon DJ	Dislocations in interfaces in the H.C.P. metals - I. Defects formed by absorption of crystal dislocations.	1999	University of Liverpool	Structural Materials	A. Serra R.C. Pond
Phillips DAS	UV/VIS Spectroscopic Studies of the Effects of Common Salt and Urea upon Reactive Dye Solutions.	1999	UMIST	Paper Chemistry	A. Whiting J.D. Hamlin
Gorham DA	The fracture of glass spheres	2000	Open University	Impact and High Strain Rates	A.D. Salman
Gorham DA	Indentation fracture of glass and mechanisms of material removal	1999	Open University	Impact and High Strain Rates	A.D. Salman
Hearle J.W.S.	A Sudy of Fatigue Types and Distribution in a Controlled Damaged Wool Carpet. Part II: Turning-walk Worn Carpet.	1999	UMIST		A.E. Harvey T.J. Jones P. Noone
Gorham DA	A study of the restitution coefficient in elastic-plastic impact	2000	Open University	Impact and High Strain Rates	A.H. Kharaz
Gorham DA	The measurement of particle rebound characteristics	2000	Open University	Impact and High Strain Rates	A.H. Kharaz
Taylor JA	Correlation of the Bioelimination of Anionic Dyes by Activated Sewage Sludge (Biomass) with Molecular Structure, Part I.	1999	UMIST	Paper Chemistry	A.J. Greaves D.A.S. Phillips
Phillips DAS	The Development of a Laboratory Method for Quantifying the Bioelimination of Water-soluble Anionic Dyes by a Biomass	2000	UMIST	Paper Chemistry	A.J. Greaves
Brown D R	Heats of adsorption and ammonia on a zeolite catalyst and an acid-activated clay catalyst determined by flow adsorption microcalorimetry.	2000	University of Huddersfield		A.J. Groszek
Braithwaite NSJ	Hydrogen trapping and permeation in nickel thoria	1996	Open University	Surfaces and Interfaces	A.K. Altunoglu
Pond RC	High resolution electron microscopy of ZnO grain boundaries in bicrystals obtained by the solid-phase intergrowth process.	1997	University of Liverpool	Functional Materials	A.N. Kiselev F. Sarrazit E.A. Stepanov
Goodyear A	Energy spectroscopy of positrons re-emitted from Ag(100)	1996	Open University	Surfaces and Interfaces	A.P. Knights P.G. Coleman
Rhodes NP	Platelet reactions to modified surfaces under dynamic conditions.	1998	University of Liverpool	Biomaterials	A.P.Shortland A.Rattray D.F.Williams
Rhodes NP	Activation status of platelet aggregates and platelet microparticles in sheared whole blood.	1997	University of Liverpool	Biomaterials	A.Shortland A.Rattray R.A.Black
Black RA	Formation and travel of vortices in model ventricles: application to the design of skeletal muscle ventricles.	1996	University of Liverpool	Biomaterials	A.Shortland J.C.Jarvis F.S.Henry
Edwards L	Measurement of the three-dimensional residual stress distribution around split-sleeve cold-expanded holes	1996	Open University	Residual Stress Measurement	A.T. Ozdemir
Bacon DJ	Mechanism of one-dimensional glide of self-interstitial atom clusters in alpha-iron.	2000	University of Liverpool	Structural Materials	A.V. Barashev Yu.N. Osetsky
Hay JN	Dielectric relaxation behaviour of fluorinated aromatic polyethers and poly(ether ketones).	1999	University of Birmingham		AA Goodwin JR Atkinson FW Mercer
Hoyland RW	The effect of felt properties on marks from grooved press rolls	1996	UMIST	Paper Physics	ADJ Harris SJ IAnson
LORIMER J.P.	Sonochemical reactions of lead tetracarboxylates with styrene	1998	Coventry University	Materials Processing Group	ANDO, T. LEVEQUE, J.T. MASON, T.J.
Evans HE	Mechanisms of breakaway oxidation and application to a chromia-forming steel.	1999	University of Birmingham		AT Donaldson TC Gilmour
Vannier R	New structural and electrical data on Bi-Mo mixed oxides with a structure based on [Bi12O14]	1999	Imperial College of Science, Technology		Abraham F Nowogrocki G Mairesse G
Mather R A	The influence of site factors on the composition and structure of semi-natural mixed-species stands of beech (Fagus sylvatica) silver fir (Abies alba) and Norway spruce (Picea abies) in the Upper Draganul Watershed of North-West Romania	1999	Buckinghamshire Chilterns University College	Forestry	Abrudan I V
Harper JF	Textile Composites from Hydro-entangled Non-woven Fabrics	2000	Loughborough University	Polymer Research Group (PRG)	Acar, M.
Connor J.A.	Thermochemistry of pentacarbonyl(2-proenyl)manganese and tetracarbonyl(?3-2-propenyl)manganese. Thermochemical considerations in alkenyl isomerisation reactions.	1997	University of Greenwich	Bio-Functional Materials	Addison, S.J. Kincaid, J.A.
Steele B C	Electrode kinetics of porous mixed-conducting oxygen electrodes	1996	Imperial College of Science, Technology		Adler SB Lane JA
Cherry RI	HFCVD Diamond Grown with Added Nitrogen: Film Characterization and Gas-Phase Composition Studies	1998	Manchester Metropolitan University	Surface Coatings and Characterisation	Afzal A Rego CA Ahmed W
Ahmed W	Rapid Thermal Annealing of In-situ p-Doped Polychrystalline Silicon Thin-Films	1999	Manchester Metropolitan University	Surface Coatings and Characterisation	Afzal A
Ahmed W	Deposition and Characterization of Copper Indium Gallium Diselenide Films by Laser Ablation and Flash Evaporation for Use in Solar Cells	1997	Manchester Metropolitan University	Surface Coatings and Characterisation	Afzal A Ahmed AE Pilkington RD
Rego CA	An Investigation of the Structural Properties of Diamond Films Deposited by Pulsed Bias Enhanced Hot Filament CVD	1999	Manchester Metropolitan University	Surface Coatings and Characterisation	Ahmed W Hassan IU Ali N
Cherry RI	CVD Diamond: Controlling Structure and Morphology	2000	Manchester Metropolitan University	Surface Coatings and Characterisation	Ahmed W Rego CA Afzal A
Hill AE	Significance of substrate temperature on the properties of flash-evaporated CuIn0.75Ga0.25Se2 thin films	1998	University of Salford		Ahmed, E Tomlinson, RD Pilkington, RD
WILKINSON AJ	Study of dislocation structures near fatigue cracks using electron channelling contrast imaging technique (ECCI)	1999	University of Oxford	Materials Properties	Ahmed, J Roberts, S G
ROBERTS SG	Characterizing dislocation structures in bulk fatigued copper single crystals using electron channelling contrast imaging (ECCI)	1997	University of Oxford	Theory and Modelling	Ahmed, J Wilkinson, A J
Connor J.A.	Influence of Alkyl Chain Length and Structure on the Extraction of Copper (II) from Aqeous Acid by 5-Alkyl-2-hydrobenzaldoximes in Hydrocarbon Solvents: Diffusion Coefficients of Extractants and Their Complexes.	1999	University of Greenwich	Bio-Functional Materials	Ainscow, T.A. Aldalur, I Beezer, A.E.
Ford J. L.	Effect of compression speeds on the compaction properties of 1:1 paracetamol - microcrystalline cellulose mixture prepared by single compression and by combinations of pre-compression and main-compression.	1997	Liverpool John Moores University	Pharmaceutical Manufacturing	Akande, O.F. Rubinstein, M.H. Rowe, P.H.
Binner JG	Bulk YBCO High-Tc Superconductors with Uniform and Full Oxygen Content via Microwave Processing	1998	Loughborough University	Ceramics Research Group (CRG)	Al-Dawery, I.A.H.
Price D	Distnguishing between overlapping low temperature and high temperature oxidation data obtained from a pressurised flow reactor system using consolidated core material	2000	University of Salford		Al-Saffar, HB Hughes, R Soufi, A
Ross DK	Inelastic neutron scattering study on different grades of palladium of varying pretreatment	2000	University of Salford		Albers, P Poniatowski, M Parker, SF
Guiu F	Degradation of PZT-4D hard piezoceramics under moderate heating	2000	Queen Mary, University of London	Materials Processing and Modelling	Alguero, M Reece, MJ
Ahmed W	Chromium Interlayers as a Tool for Enhancing Diamond Adhesion on Copper	2000	Manchester Metropolitan University	Surface Coatings and Characterisation	Ali N Rego CA Fan QH
Peinado C	Photocalorimetric Study on the Photoinitiation Activity of Water Soluble Copolymers with Pendent Benzil Moieties	2000	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Catalina F Blanco M
Peinado C	Entrapment of Stabilisers in Silica: Part 1: Controlled Release of Additives During Polypropylene Degradation	1997	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Edge M Corrales T
McMahon AW	A Comparative Kinetic Study of Commercial Photoinitiators for UV/Visible Curable Acrylate Clear Coatings	1999	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Segurola J Edge M
Liauw CM	Effect of Interactions Between Stabilisers and Silica Used for Antiblocking Applications on UV and Thermal Stability of Polyolefin Films: Part II Degradation Studies	1999	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Childs A Edge M
Edge M	Photophysical Properties and Photoinduced Polymerisation Activity of Novel 1-chloro-4-oxy/acyloxythioxanthone Initiators	1999	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Salleh NG Shah M
Corrales T	Photochemistry and Photo-Induced Co-Synergistic Polymerisation Activities of Novel N,N,-Dimethylaminobenzoates and Benzamides	2000	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Edge M Sethi S
Corrales T	Photochemistry and Photopolymerization Activities of Novel Phenylthiobenzonephenone and Diphenylthiophene Photoinitiators	1998	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Edge M Catalina F
Corrales T	Photochemistry and Photoinitiator Properties of 4-Substituted Amidobenzophenones and Imidobenzophenones	1996	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Salleh NG Edge M
Cherry RI	Analysis of Radical Content on Carbon Black Pigments by Electron Spin Resonance: Influence of Functionality, Thermal Treatment and Absorption of Acidic and Basic Probes	2000	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Edge M Liauw CM
Catalina F	Ageing and Spectroscopic Properties of Polyethylenes: Comparison with Metallocene Polymer	2000	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Edge M Holdsworth D
Catalina F	Photochemistry and Photopolymerization Activity of Monomers and Copolymers of 2-substituted Amidoanthraquinone and Acryloxyanthraquinone with Methyl Methacrylate	1997	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Pullen G Edge M
Catalina F	Photochemistry and Photopolymerisation Activities of Novel Alkylthiobenzophenone Photoinitiators	1998	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Corrales T Edge M
Catalina F	Photochemistry and Photocuring Activities of Novel Substituted 4'-(4-methylphenylthio)benzophenones as Photoinitiators	1997	Manchester Metropolitan University	Organic Polymer Materials	Allen NS Edge M Corrales T
OREILLY KAQ	Intermetallic phase selection in 1XXX Al alloys	1998	University of Oxford	Materials Processing	Allen, C M Cantor, B Evans, P V
OREILLY KAQ	The effect of vanadium and grain refiner additions on the nucleation of secondary phases in 1xxx Al alloys	1999	University of Oxford	Materials Processing	Allen, C M Evans, P V Cantor, B
Johnson D J	Structure-Property Relationships in Natural Cellulosic Fibres: Part 1: Characterisation	1999	University of Leeds	Textile Manufacturing + Technical Textiles	Ansari, I.A. East, G.C.
Ross DK	Strong anisotropy in the inelastic neutron scattering from PdH at high energy transfer	1998	University of Salford		Antonov, VE Bokhenkov, EL Kolesnikov, AI
Shen T	The linear optical response of reconstructed Sn/Si(111) surfaces	1996	University of Salford		Anyele, H Matthai, CC
Hogg PJ	Application of Whitney and Nuismer stress fracture criterion to composites loaded in shear	1999	Queen Mary, University of London	Materials Processing and Modelling	Aramah, SE Hill, PS
Shollock B A	Twin formation during creep in single crystals of nickel-based superalloys	1999	Imperial College of Science, Technology		Ardakani MG McLean M
Shollock B A	Implications of dislocation micromechanisms for changes in orientation and shape of single crystal superalloys	1998	Imperial College of Science, Technology		Ardakani MG Ghosh RN Brien V
Mclean M	Directional and single-crystal solidification of Ni-base superalloys: Part II Coincidence site lattice character of grain boundaries	2000	Imperial College of Science, Technology		Ardakani MG D'Souza N Shollock BA
Snowden M.J.	The effect of sodium chloride upon miscellisation and phase separation transitions in aqueous solutions of tri-block copolymers: A high sensitivity differential scanning calorimetry study.	1998	University of Greenwich	Bio-Functional Materials	Armstrong, J. Chowdhry, B.Z. Leharne, S.A.
Mitchell J.C.	Effects of Cosolvents and Cosolutes upon Aggregation Transitions in Aqueous Solutions of the Poloxamer F87 (Polaxamer P237): A High Sensitivity Differential Scanning Calorimetry Study.	1996	University of Greenwich	Bio-Functional Materials	Armstrong, J. Chowdhry, B.Z. Beezer, A.E.
Kelly PJ	Control of the structure and properties of aluminium oxide coatings deposited by pulsed magnetron sputtering	1999	University of Salford		Arnell, RD
Kelly PJ	The influence of magnetron configuration on ion current density and deposition rate in a dual unbalanced magnetron sputtering system	1998	University of Salford		Arnell, RD
Kelly PJ	The influence of substrate temperature on the properties of Al, Zr and W coatings deposited by closed-field unbalanced magnetron sputtering	1998	University of Salford		Arnell, RD
PETHICA JB	Nano-scale indentation creep-testing at non-ambient temperature	1998	University of Oxford	Materials Characterisation	Asif, S A
Greer A.L.	Site-ordering effects on element partitioning during rapid solidification of alloys	1996	University of Cambridge	Physical Metallurgy	Assadi
Skinner GA	Studies of Fire-Retardant Polyester Thermosets using Thermal Methods	1999	Kingston University		Atkinson, P.A. Haines, P.J. Lever, T.J.
Skinner GA	Inorganic Tin Compounds as Flame Retardants and Smoke Suppressants for Polyester Thermosets	2000	Kingston University		Atkinson, P.A. Haines, P.J.
Lee P D	Diffusion-controlled growth of hydrogen pores in aluminium-silicon castings: In situ observation and modelling	2000	Imperial College of Science, Technology		Atwood RC Sridhar S Zhang W
Paul R G	Isolation and characterisation of advanced glycation end-products derived from the in vitro reaction of ribose and collagen	1998	University College Northampton	Chemistry and Biochemistry of Leathermaking	Avery, N C Slatter, D A Sims, T J
Monk PMS	Solid-State Properties of Thin Film Electrochromic Cobalt-Nickel Oxide	1997	Manchester Metropolitan University	Surface Coatings and Characterisation	Ayub S
Bate PS	The Effect of Elastic Interactions Between Displacive Transformations on Textures in Steels	2000	University of Manchester	Metallic Materials	B Hutchinson
McIlhagger R	The development and appraisal of 3D fully integrated woven structures for textile reinforced composites	1997	University of Ulster	Engineering Composites Research Centre	B J Hill
Horrocks A R	Complex char formation in flame-retarded fibre-intumescent combinations III. Physical and chemical nature of char.	1999	Bolton Institute of HE	Textile Materials	B Kandola
Cable M	Chemical Durability of SrO-MgO-ZrO2-SiO2 Glasses in Strongly Alkaline Environments	2000	University of Sheffield	Ceramics and Glass	B Karasu
Sharp JH	Kinetics and Mechanism of Formation of Monocalcium Aluminate, CaAl2O4	1997	University of Sheffield	Ceramics and Glass	B M Mohamed
Charsley E L	Thermal analysis studies on the boron-potassium perchlorate-nitrocellulose pyrotechnic system.	1997	University of Huddersfield		B. Berger A.J. Brammer J.J. Rooney
Hull D	Simulation of prismatic cracking of cooling basalt lava flows by the drying of solgels.	1999	University of Liverpool	Structural Materials	B.D. Caddock
CAREY R.	Oxidation Effects in Granular Cobalt Films	1997	Coventry University	Data Storage Materials Group	BOUVIER, P.J.A. NEWMAN, D.M.
Campbell J	The mechanism of filtration in the reduction of casting defects due to surface turbulence during mould filling.	1997	University of Birmingham		BR Sirrell
PETERSON I.	Grazing-Incidence x-ray Diffraction Study of Octoadecanoic Acid Monolayers	1998	Coventry University	Molecular and Biomolecular Electronics Group	BREZESINSKI, G. STRUTHS, B. SCALAS, E.
Iype C	Winding of Conical Packages at Constant Delivery Rate. Part II: A new Tension Compensatory System for use in Fixed Rate Delivery	1997	University of Leeds	Textile Mechatronics	Babaarslan, O. Leaf, G.A.V.
Iype C	Tension Variations During Cone Winding on an Open-end Spinning System	1998	University of Leeds	Textile Mechatronics	Babaarslan, O.
Bhadeshia H.K.D.H.	The evolution of solutions: A thermodynamic analysis of mechanical alloying	1997	University of Cambridge	Physical Metallurgy	Badmos
Boyd RD	Nonequilibrium Plasma Treatment of Miscible Polystyrene/Poly (Phenylene Oxide) Blends	1997	Manchester Metropolitan University	Surface Coatings and Characterisation	Badyal JPS
Boyd RD	Silent Discharge Treatment of Immiscible Polystyrene/Polycarbonate Polymer Blend Surfaces	1997	Manchester Metropolitan University	Surface Coatings and Characterisation	Badyal JPS
Steele B C	Properties of La0.6Sr0.4Co0.2Fe0.8O3-d (LSCF) double layer cathodes on gadolinium-doped cerium oxide (CGO) electrolytes. Role of SiO2	1998	Imperial College of Science, Technology		Bae J-M
GRANT PS	Microstructural evaluation of monolithic and continuous fibre reinforced Al-12wt.%Si produced by low pressure plasma spraying	1999	University of Oxford	Materials Processing	Baik, K H
CANTOR B	Development of microstructure in spray formed alloys	1997	University of Oxford	Materials Processing	Baik, K H Grant, P S
Paul R G	The effect of advanced glycation end-product formation upon cell-matrix interactions	1999	University College Northampton	Chemistry and Biochemistry of Leathermaking	Bailey, A J
GRANT PS	The response of SiC fibres to vacuum plasma spraying and vacuum hot pressing during the fabrication of titanium matrix composites	1999	University of Oxford	Materials Processing	Baker, A M Jenkins, M L
Choy K L	Diffusion barrier coatings on ductile particles for protection in bioactive glass-ceramic matrix	2000	Imperial College of Science, Technology		Balzer R Rawlings RD
Edirisinghe MJ	Polycyclodisilazane: a new polymeric precursor for silicon nitride-based ceramics	2000	Queen Mary, University of London	Materials Processing and Modelling	Bao, X
Edirisinghe MJ	Preparation of silicon carbide foams using polymeric precursor solutions	2000	Queen Mary, University of London	Materials Processing and Modelling	Bao, X Nangrejo, MR
Barnes AJ	Structure and polarised IR and Raman spectra of the solid complex betaine-trichloroacetic acid	2000	University of Salford		Baran, J Engelen, B Panthofer, M
Barnes AJ	Structure and vibrational spectra of the bis(betaine)-selenic acid molecular crystal	1997	University of Salford		Baran, J Marchewka, MK Pietraszko, A
Hodgson SN	Processing and Performance of a Novel Cathode Material	1999	Loughborough University	Ceramics Research Group (CRG)	Barker, A.P. Goodhand, C.J. Van der Heide, P.A.M.
Burstein G.T.	Anodic oxidation of methanol using a new base electrocatalyst	1996	University of Cambridge	Materials Chemistry	Barnett Kucernak Williams
Bonfield W.	Carbonate substitution in precipitated hydroxyapatite: An investigation into the effects of reaction temperature and bicarbonate ion concentrate	1997	University of Cambridge	Biomaterials	Barralet Best
Best SM	Carbonate substitution in precipitated hydroxyapatite: An investigation into the effects of reaction temperature and bicarbonate ion concentration	1998	Queen Mary, University of London	Biomedical Materials	Barralet, J Bonfield, W
Arrigan DWM	A scanning force microscopy study of poly(phenol) fims containing immobilised glucose oxidase	1998	University of Salford		Bartlett, PN
Guiu F	Cyclic fatigue crack growth resistance of Al2O3-Al2TiO5 composites	1996	Queen Mary, University of London	Materials Processing and Modelling	Bartolome, JF Requena, J Moya, JS
Arnell RD	Aluminium-Magnesium alloys as corrosion resistant coatings for steel	1996	University of Salford		Bates, RI Baldwin, KR Smith, CJE
Gabe DR	Assessment of Surface Cleanliness for Metal Surfaces using an Electrochemical Technique	1997	Loughborough University	Metals Research Group (MRG)	Baumgartner, M.E. Raub, Ch.J
Ghotra JS	Measuring and Reducing Moisture Penetration through Thick Laminates	1996	Kingston University		Bavisi, B.H. Pritchard, G.
Rawlings R D	Effect of chemical vapour infiltration on erosion and thermal properties of porous carbon/carbon composite thermal insulation	2000	Imperial College of Science, Technology		Baxter RI Iwashita N Sawada Y
Colquhoun HM	Sulfone linked paracyclophanes via macrocyclic aromatic thioethers: synthetic and structural investigations	2000	University of Salford		Baxter, I Ben-Haida, A Hodge, P
Verran J	A Simple in Vitro System for the Study of Biofilm	1998	Manchester Metropolitan University	Surface Coatings and Characterisation	Beadle IR Hisset T Jones CL
Rego CA	Friction Force Microscopy Study of Diamond Films Modified by a Glow Discharge Treatment	2000	Manchester Metropolitan University	Surface Coatings and Characterisation	Beake BD Hassan IU Ahmed W
Chen G.Z.	Electrochemical molecular recognition: pathways between complexation and signalling	1999	University of Cambridge	Materials Chemistry	Beer Gale
Mitchell J.C.	Pharmaceutical Microcalorimetry: Applications to Longer-Term Stability Studies.	1999	University of Greenwich	Bio-Functional Materials	Beezer, A.E. Gaisford, S. Hills, A.K.
Connor J.A.	Thermodynamic and kinetic parameters from isothermal heat conduction microcalorimetry.	1998	University of Greenwich	Bio-Functional Materials	Beezer, A.E. Willson, R.J. Mitchell, J.C.
Kilner J A	Degradation of La0.6Sr0.4Fe0.8Co0.2O3-d in carbon dioxide and water atmospheres	1999	Imperial College of Science, Technology		Benson SJ Waller D
Evetts J.E.	Intrinsic channeling of vortices along the ab plane in vicinal YBa2Cu3O7-delta films	1997	University of Cambridge	Device Materials	Berghuis DiBartolomeo Wagner
Skinner S J	The influence of pH on zirconia formed from zirconium (IV) acetate solution: characterization by X-ray powder diffraction and Raman spectroscopy	1999	Imperial College of Science, Technology		Berry FJ Bell IM Clark RJH
Skinner S J	57Fe Mossbauer spectroscopic examination of a single crystal of Fe3O4	1998	Imperial College of Science, Technology		Berry FJ Thomas MF
Hing K	Characterisation of porous hydroxyapatite	1999	Queen Mary, University of London	Biomedical Materials	Best, SM Bonfield, W
Hing K	Biomechanical assessment of bone ingrowth in porous hydroxyapatite	1997	Queen Mary, University of London	Biomedical Materials	Best, SM Tanner, KE Bonfield, W
Hing K	Quantification of bone ingrowth within bone-derived porous hydroxyapatite implants of varying density	1999	Queen Mary, University of London	Biomedical Materials	Best, SM Tanner, KE Bonfield, W
Hing K	Histomorphological and biomechanical characterisation of calcium phosphates in the osseous environment	1998	Queen Mary, University of London	Biomedical Materials	Best, SM Tanner, KE Revell, PA
Taylor A O	Supported binary oxide monolayers as selective oxidation catalysts: Bi2Mo3O12/TiO2	1999	University of Salford		Bhakoo, A Bond, GC Rees, RD
Hogg PJ	Influence of reinforcement architecture on damage mechanisms and residual strength of glass-fibre/epoxy composite systems	1998	Queen Mary, University of London	Materials Processing and Modelling	Bibo, GA
TAYLOR G	The formation of ordered domains during crystal growth of gamma-TiAl	2000	University of Oxford	Materials Properties	Bird, N Jiao, S
Donnelly SE	Plastic flow induced by single ion impacts on gold	1996	University of Salford		Birtcher, RC
Donnelly SE	Ion induced spike effects on metal surfaces	1999	University of Salford		Birtcher, RC
Donnelly SE	Behavior of crystalline Xe nanoprecipitates during coalescence	1999	University of Salford		Birtcher, RC Song, M Furuya, K
Donnelly SE	Nanoparticle ejection from Au induced by single Xe ion impacts	2000	University of Salford		Birtcher, RC Schlutig, S
Shen J.	Some factors affecting the control of proteolytic enzyme reactions on wool	1999	De Montfort University	TEAM Research Group	Bishop D.P. Heine E. Hollfelder B.
Shen J.	The use of proteolytic enzymes to reduce wool-fibre stiffness and prickle	1998	De Montfort University	TEAM Research Group	Bishop D.P. Heine E. Hollfelder B.
Evetts J.E.	Defect-induced spin disorder and magnetoresistance in single-crystal and polycrystal rare-earth manganite thin films	1998	University of Cambridge	Device Materials	Blamire Mathur Isaac
Clegg W.J.	Crack deflection in ceramic laminates using porous interlayers	1998	University of Cambridge	Polymers, Ceramics + Composites	Blanks Kristoffersson Carlstrom
Clemens M	Characterisation of Styrene-butadiene Block Copolymers by Gel Permeation Chromatography	1999	Manchester Metropolitan University	Organic Polymer Materials	Boborodea AG Albu A-M Vasilescu DS
Clemens M	Characterisation of Gel Permeation Chromatography Column by Fractal Geometry	2000	Manchester Metropolitan University	Organic Polymer Materials	Boborodea AG Stere C Vasilescu DS
TODD RI	Thermal residual stresses and their toughening effect in Al2O3 platelet reinforced glass	1999	University of Oxford	Materials Properties	Boccaccini, A R Sinclair, R Yallee, R B
Ovenstone J.	Fabrication of Woven Metal Fibre Reinforced Glass Matrix Composites	1997	University of Greenwich	Opto-electronic/electroactive Materials	Boccachini, A. Trusty, P.
Barnes AJ	Reversal of the usual (C-H/D) spectral shift of haloforms in some hydrogen-bonded complexes	1997	University of Salford		Boldeskul, IE Tsymbal, IF Ryltsev, EV
Taylor A O	Preparation and characterisation of titania-supported vanadium-phosphorous oxide catalysts	1999	University of Salford		Bond GC Ismail, HM
Taylor A O	Kinetics of metal-catalyzed reactions of alkanes and the compensation effect	1996	University of Salford		Bond, GC Hooper, AD Slaa, JC
Rehman I	Characterisation of hydroxyapatite and carbonated apatite by photo acoustic FTIR Spectroscopy	1997	Queen Mary, University of London	Biomedical Materials	Bonfield, W
Boardman AD	Transverse modulation instability of vector optical beams in quadratic nonlinear media	1997	University of Salford		Bontemps, P Xie, K
Blamire M.G.	Proximity coupling in high Tc Josephson junctions produced by focused electron beam irradiation	1997	University of Cambridge	Device Materials	Booij Pauza Tarte
Boag NM	Bonding configurations for nickelocene on Ag(100) and steric effects in thermal desorption	2000	University of Salford		Borca, CN Welipitya, D Dowben, PA
BROOK RJ	Influence of processing on the microstructural development and flexure strength of Al203/SiC nanocomposites	1997	University of Oxford	Materials Properties	Borsa, C E Jones, N M R Todd, RI
Humphreys C.J.	Experimental and theoretical study of the electronic structure of Fe, Co, and Ni aluminides with the B2 structure	1996	University of Cambridge	Physical Metallurgy	Botton Guo Temmerman
Hodges P	The Penetration of Fluids with Different Swelling Characteristics into Timber	2000	Buckinghamshire Chilterns University College	Wood Protection	Bourguiba N
TODD RI	Neutron diffraction measurements of residual stresses in alumina/SiC nanocomposites	1997	University of Oxford	Materials Properties	Bourke, M A M Borsa, C E Brook, R J
Ahmed W	Impact of Surface Engineering Technologies on the Performance and Life of Multi-point Cutting Tools	1997	Manchester Metropolitan University	Surface Coatings and Characterisation	Bradbury SR Lewis DB Archer DM
GROVENOR CRM	Thallium-based HTS thin films, processing, properties and applications	1999	University of Oxford	Materials Processing	Bramley, A P O'Connor, J D
GRIME GW	Observation of planar oscillations of MeV protons in silicon using ion channeling patterns	1996	University of Oxford	Materials Characterisation	Breese, M B H King, P J C Smulders, P J M
Rego CA	Thermally Stimulated Properties of CVD Diamond Films	2000	Manchester Metropolitan University	Surface Coatings and Characterisation	Briand D Iacconi P Benabdesselam M
Lindley T C	Contact damage of poly(methylmethacrylate) during complex microdisplacements	2000	Imperial College of Science, Technology		Briscoe BJ Chateauminois A Parsonage D
Hudson A	Leather coloration	2000	University College Northampton	Chemistry and Biochemistry of Leathermaking	Britten, P A
Hudson A	Recent advances in grain damage coverage and colour fastness	2000	University College Northampton	Chemistry and Biochemistry of Leathermaking	Britten, P A Stosic, R G Wood, C B
Jennings S B	Gap-Size Niche Differentiation By Tropical Rainforest Trees: A Testable Hypothesis Or A Broken-Down Bandwagon?	1996	Buckinghamshire Chilterns University College	Forestry	Brown N D
Jennings S B	Assessing forest canopies and understorey illumination: canopy closure, canopy cover and other measures	1999	Buckinghamshire Chilterns University College	Forestry	Brown N D Sheil D
Webster PJ	The magnetization distributions in some Heusler alloys proposed as half-metallic ferromagnets	2000	University of Salford		Brown, PJ Neumann, KU Ziebeck, KRA
Brown JW	The Use of a Phenylpyrazine Liquid Crystalline Material with a Liquid Crystalline Solvent Mediator as an Ion-Selective Electrode	2000	Kingston University		Buckley-Dhoot, E.M. Shah, J. Bandara, A.J.
Foot PJS	International Patent Application PCT/GB97/00742International Publication No. WO98/41555Conductive Polymers and Processes for their Preparation	1998	Kingston University		Budd, D. Davis, R.
Shollock B A	Characterisation of crystallographic evolution during creep deformation of a single crystal superalloy	1997	Imperial College of Science, Technology		Buffiere JY Curtis RV Henderson MB
Greer A.L.	Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al-Ti-B.	2000	University of Cambridge	Physical Metallurgy	Bunn Tronche Evans
HUTCHISON JL	In situ fullerene formation -- The evidence presented	1998	University of Oxford	Materials Characterisation	Burden, A P
Blackburn R S	The Application of Cationic Fixing Agents to Cotton Dyed With Direct Dyes Under Different pH Conditions	1998	University of Leeds	Textile Chemistry	Burkinshaw, S. M. Collins, G. W.
Blackburn R S	Dyeing of Cotton/Polyamide Blend Fabrics with 1:2 Metal Complex Acid Dyes	2000	University of Leeds	Textile Chemistry	Burkinshaw, S. M. Gordon, R.
Blackburn R S	The Dyeing of Silk with Reactive Dyes, Part 1: Realan Dyes	1999	University of Leeds	Textile Chemistry	Burkinshaw, S. M. Gandhi, K.
Blackburn R S	Afterteatment of Acid Dyes on Conventional Nylon 6.6 with a Commercial Syntan/Cation System. Part 3: Improvements to the Fixogene AC System	2000	University of Leeds	Textile Chemistry	Burkinshaw, S. M.
Brown P J	Method for Dyeing Synthetic Materials with Vat Dyestuffs	1998	University of Leeds	Textile Chemistry	Burkinshaw, S.M.
Thomas AG	Crack growth and strain induced anisotropy in carbon black filled natural rubber	1997	Queen Mary, University of London	Materials Processing and Modelling	Busfield, JJC Ratsimba, CH
Cameron R.E.	A study of the molecular relaxations in solid starch using dielectric spectroscopy	2000	University of Cambridge	Biomaterials	Butler
BUCKNALL DG	Real-time measurement of polymer diffusion coefficients using neutron reflection	1999	University of Oxford	Materials Properties	Butler, S A Higgins, J S
Young R J	Investigation of Structure/Property Relationships in Particulate Composites Through the Use of Raman Spectroscopy	1999	UMIST	Paper Physics	C A Cooper
Bowen P	Experimental characterisation of fibre failure and its influence on crack growth resistance in fibre reinforced titanium metal matrix composites.	1998	University of Birmingham		C Barney AR Ibbotson
Robson D	Drape Analysis Using Imaging Techniques	2000	Heriot-Watt University	Textile Science + Technology	C C Long
Hayes SA	In-Situ Process and Condition Monitoring of Advanced Fibre-Reinforced Composite Materials Using Optical Fibre Sensors	1998	University of Sheffield	Polymers and Polymer Matrix Composites	C Doyle A R Martin T Liu
Brown NMD	A combined AES, resonant photoemission and EELS study of in-situ grown titanium nitride	1997	University of Ulster	Surface Science Group	C G H Walker C A Anderson A McKinley
Brown NMD	An estimate of the electron effective mass in titanium nitride using UPS and EELS	1998	University of Ulster	Surface Science Group	C G H Walker J A D Matthew C A Anderson
Marrow T J	The Fracture Mechanism of 475oC Embrittlement in a Duplex Stainless Steel	1996	UMIST	Process Control	C Harris
Palmiere EJ	The Influence of Niobium Supersaturation in Austenite on the Static Recrystallization Behaviour of Low Carbon Microalloyed Steels	1996	University of Sheffield	High Performance Metallics and Process Modelling	C I Garcia A J DeArdo
Dharmadasa I M	Metal/n-CdTe interfaces: A study of electrical contacts by Deep Level Transient Spectroscopy and Ballistic Electron Emission Microscopy	1998	Sheffield Hallam University	Innovative Spectroscopy, Microscopy and Analysis	C J Blomfield C G Scott R Coratger
Sinclair DC	Synthesis, Phase Stability and Electrical Characterisation of BINAVOX Solid Solutions	1997	University of Sheffield	Ceramics and Glass	C J Watson A Coats
Christie R M	The Formation of Dihydroxyspiro[1,2]oxazines from the reaction of Fischer's Base with some Isonitroso Compounds	1996	Heriot-Watt University	Colour Science + Technology	C K Agyako K Mitchell A Lycka
Maguire PD	Growth of SrS thin films by pulsed-laser deposition	1997	University of Ulster	Thin Films Group	C Karner J McLaughlin S Laverty
Ponton CB	Preparation of heterocoagulated colloidal suspensions for fabrication of ceramic matrix composites by electrophoretic filtration deposition.	1998	University of Birmingham		C Kaya PA Trusty
Freer R	Direct Observation of the Barrier Structure of a Praseodymium-Doped Grain Boundary in a Zinc Oxide Bicrystal by Charge Collection Microscopy	2000	UMIST	Paper Chemistry	C Leach F Azough Z Ling
Cleaver D J	Extension and generalisation of the Gay-Berne potential	1996	Sheffield Hallam University	Materials Modelling	C M Care M P Allen M P Neal
Anand SC	Effects of laundering on sensory and mechanical properties of 1 x 1 rib knitwear fabrics. Part II: Changes in sensory and mechanical properties.	1999	Bolton Institute of HE	Textile Materials	C MacKay D Bishop
Anand SC	Effects of laundering on sensory and mechanical properties of 1 x 1 rib knitwear fabrics. Part 1: Experimental procedures and fabric textile dimensional properties.	1996	Bolton Institute of HE	Textile Materials	C MacKay D Bishop
Hall ME	Effects of sewage treatment on textile effluent.	1997	Bolton Institute of HE	Textile Materials	C Moran R Howell
Yarwood J	Raman microscopic studies of the distribution of the fungicide fluorfolpet in plasticised PVC films	2000	Sheffield Hallam University	Polymers, Composites and Surfaces	C Mura R Swart D Hodge
Wiseman N	Retention aid systems of cationic microparticles and anionic polymer: experiments and pilot machine trials	2000	UMIST	Paper Chemistry	C Ovenden H Xiao
Munz W D	Hard coatings deposited by combined cathodic arc evaporation and magnetron sputtering (Arc Bond Sputtering: ABS)	2000	Sheffield Hallam University	Surface Engineering	C Schonjahn H Paritong I J Smith
Baird M	Determination of Alkyl Phenol Ethoxylates in Wool Scouring Effluent	1998	Heriot-Watt University	Textile Science + Technology	C Sun
Baird M	Determination of Polyethylene Glycols by both Normal Phase and Reverse Phase Modes of HPLC	1998	Heriot-Watt University	Textile Science + Technology	C Sun J Simpson
Stott F H	High Temperature Corrosion of Iron-Chromium Alloys in Oxidizing-Chloridizing Conditions	2000	UMIST	Corrosion and Protection	C Y Shih
Hawkyard CJ	Computer Match Prediction for Fluorescent Dyes by Neural Networks.	2000	UMIST	Paper Chemistry	C de M Bezerra
Cooke WD	The Measurement of Twist Angle using Image Analysis.	1996	UMIST	Paper Physics	C. Cork J.P. Wild